Quote:
|
Originally Posted by Droc
interesting
for the longest time I wanted to put a 250mm silencer on my SR16 and drop in a PSG1 tightbore but was worried about the suction effect. There wasnt much info regarding this thus far. And judging for Dirty Deeds last post about the SR16 with the M16 barrel, its a good thing I didnt. Ill prolly hold off untill we come-up with a barrel-length to cylinder matching guide.
awsome info
|
Here's your guide:
For a PSG-1 inner barrel (590mm, NOT 650mm!), you will need one of these cylinders:
- Systema Type-0
- KM Long
All of these are capable of handling up to 590mm inner barrels.
The information is all available in the product specs. If ppl are really interested, I can compile data for all brands.
If you're looking to do the 650mm inner barrel, you'll need to upgrade to a Systema bore-up Type-0 cylinder kit (which means new piston head, new cylinder, new cylinder head and new air nozzle) and you should be using at LEAST an M120 spring to get it working properly.