Airsoft Canada - View Single Post

Nathan.g · April 19th, 2017, 11:30

Thanks for the quick reply's - I will try this tonight.

I don't think it's an issue of how much the hop up is pressed on the gearbox because before I spaced the outer barrel outwards, it was being completely jammed on the gear box and did cause some minor misfeesibg issues (2 piece hop up was spreading wider and compressing, causing the lip to ever so slightly over hang). I should mentioned I had to change the outer barrel as well because the old one snapped in half.

April 19th, 2017, 11:30	#4
Nathan.g Trader rating Join Date: Jan 2016 Location: Beeton, Ontario	Thanks for the quick reply's - I will try this tonight. I don't think it's an issue of how much the hop up is pressed on the gearbox because before I spaced the outer barrel outwards, it was being completely jammed on the gear box and did cause some minor misfeesibg issues (2 piece hop up was spreading wider and compressing, causing the lip to ever so slightly over hang). I should mentioned I had to change the outer barrel as well because the old one snapped in half.