Airsoft Canada - View Single Post

Merlin Coryell · October 6th, 2005, 19:33

I recently purchased a new KJW Para FMV and a used Maruzen P99. From the first test of the P99 I would only get 5-10 shots off before the mag was empty of gas. Sometimes it wouldnt even cycle the slide all the way but it seems to do so now. I checked seals and put some lube in it, but no difference. Now my brand new KJW Para is doing the same thing.

I have tried both 134 and a little Green Gas on the P99 and Green Gas only on the Para. No differences. I did spray some oil on the mag at the fill valve, release button and a tiny bit into the top of the mag well itself.

Could both of these just be a problem of over lubrication? Is this a common problem or did I get two lemons? Para worked great until now, yet its only had about 10mags at the most shot through it.

Thanks.

October 6th, 2005, 19:33	#1
Merlin Coryell Trader rating Join Date: Sep 2005 Location: Houston	Two Gas Guns, Same Mag Problem? I recently purchased a new KJW Para FMV and a used Maruzen P99. From the first test of the P99 I would only get 5-10 shots off before the mag was empty of gas. Sometimes it wouldnt even cycle the slide all the way but it seems to do so now. I checked seals and put some lube in it, but no difference. Now my brand new KJW Para is doing the same thing. I have tried both 134 and a little Green Gas on the P99 and Green Gas only on the Para. No differences. I did spray some oil on the mag at the fill valve, release button and a tiny bit into the top of the mag well itself. Could both of these just be a problem of over lubrication? Is this a common problem or did I get two lemons? Para worked great until now, yet its only had about 10mags at the most shot through it. Thanks.