|
file it down if you don't care about resale value. Any v2 pistol grip will fit. Some better than others. The only ones I know that have issues are magpul moe and the fake magpul moe grips. the threaded screw hole on the bottom for the motor height adjuster is too tall, throwing off the motor height. You can just grind to first few rows of threading off with a dremel and they are usually fine. Just be careful of pinching wires when you put the motor back in.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.
|