Airsoft Canada - View Single Post

Cheesepie · October 20th, 2016, 18:09

I run the Howards Leight impact sports with a Impact comms GRSM-HD1 speaker mic. The speaker mic has a kenwood type pin which plugs directly into my Baofeng UV-R5 with no problems on either the mic or audio ports. From there i plug my impact comms into a 3.5 mm port on the speaker mic with a standard 3.5 mm 2 pole cord. Ran this setup few a few games now and it works just fine for me.

I am only getting audio out of one side speaker on the Howards, though it it caused by the cheapo 3.5 mm cord i am currently using.

October 20th, 2016, 18:09	#13
Cheesepie Trader rating Join Date: Mar 2013 Location: Markham, Ontario	I run the Howards Leight impact sports with a Impact comms GRSM-HD1 speaker mic. The speaker mic has a kenwood type pin which plugs directly into my Baofeng UV-R5 with no problems on either the mic or audio ports. From there i plug my impact comms into a 3.5 mm port on the speaker mic with a standard 3.5 mm 2 pole cord. Ran this setup few a few games now and it works just fine for me. I am only getting audio out of one side speaker on the Howards, though it it caused by the cheapo 3.5 mm cord i am currently using. Last edited by Cheesepie; October 20th, 2016 at 18:11..