Quote:
Originally Posted by lurkingknight
is the BB falling into the path of the nozzle and not shooting or is it sitting on top of the nozzle and not shooting?
is the nozzle capable of inserting completely into the hopup unit without obstruction without a bb there?
|
Yes the bb falls in the path of the nozzle. The nozzle hits the bb but does not push it past the bucking lip.
I can't really tell if the nozzle goes completely to the bucking but it does fit in the hop fully. I will test this further at a later date as I suspect the nozzle is to short, not to long as was mentioned above. If you look down the top of the hop straight on you cannot see the bucking. If you look the same way at the stock one, it is slightly protruding. So the bucking is deeper in the prowin.