Airsoft Canada - View Single Post - VSR-10 Upgrade Advice - Zero-Trigger or Not?

ao_tenshi · August 26th, 2016, 11:56

hey guys, just resurrecting this thread for an update.

I've gone with the Modify Tan hopup bucking, in the Action Army Hop up chamber. Did teflon tape and floss to seal the bucking for air seal around rubber.

Testing using 0.28g and 0.4g BBs, I've found that for 0.28g, Im getting good range and lift, but for 0.4g, the bucking seems to be struggling to get range and lift in contract to the 0.28g. Just want to confirm if this rubber is not meant for 0.4g BBs before i do anything else at the moment.

August 26th, 2016, 11:56	#48
ao_tenshi Trader rating Join Date: Apr 2011 Location: Toronto, Ontario	hey guys, just resurrecting this thread for an update. I've gone with the Modify Tan hopup bucking, in the Action Army Hop up chamber. Did teflon tape and floss to seal the bucking for air seal around rubber. Testing using 0.28g and 0.4g BBs, I've found that for 0.28g, Im getting good range and lift, but for 0.4g, the bucking seems to be struggling to get range and lift in contract to the 0.28g. Just want to confirm if this rubber is not meant for 0.4g BBs before i do anything else at the moment.