Airsoft Canada - View Single Post

-Shade · July 7th, 2016, 08:24

PicoSSR install is definitely worth it. Much improved trigger response w/ a 7.4v LiPo. It's a bit complicated though. You will have to disassemble the original trigger mechanism a fair bit. Would definitely recommend mapping out your connections on paper first before soldering. The space inside is very snug though - when I had one a long time ago I used micro deans plugs and was able to fit a 950mah battery in there. If you don't feel like that hassle, I HIGHLY recommend using regular deans and just wiring to an external PEQ (which I ended up doing in the end)

July 7th, 2016, 08:24	#4
-Shade Trader rating Join Date: Feb 2013 Location: Oakville - ON	PicoSSR install is definitely worth it. Much improved trigger response w/ a 7.4v LiPo. It's a bit complicated though. You will have to disassemble the original trigger mechanism a fair bit. Would definitely recommend mapping out your connections on paper first before soldering. The space inside is very snug though - when I had one a long time ago I used micro deans plugs and was able to fit a 950mah battery in there. If you don't feel like that hassle, I HIGHLY recommend using regular deans and just wiring to an external PEQ (which I ended up doing in the end) Last edited by -Shade; July 7th, 2016 at 08:28..