Airsoft Canada - View Single Post - Lonex 8mm Enhanced Bearing Gearbox V2 M4/M16 = Piston scoring cylinder

lurkingknight · April 28th, 2016, 08:27

kingarms gearset.

I've been told the tappet lug on these things is in the wrong spot so the tappet pulls away too soon from when the pistol releases so the air charge is still being delivered when the loading cycle starts. I'm not sure if you can fix it or not with a KA tappet, you'd have to mod it to fit the front end of the lonex gearbox.

easiest way to determine if the tappet timing is different is to compare another sector gear vs the kingarms and see where the tappet lug pin is in comparison to the sector teeth.

If it's different either a KA tappet might fix it, or just getting a SHS gearset will fix it.

April 28th, 2016, 08:27	#2
lurkingknight "bb bukakke" KING! Trader rating Join Date: Jul 2011 Location: Ottawa	kingarms gearset. I've been told the tappet lug on these things is in the wrong spot so the tappet pulls away too soon from when the pistol releases so the air charge is still being delivered when the loading cycle starts. I'm not sure if you can fix it or not with a KA tappet, you'd have to mod it to fit the front end of the lonex gearbox. easiest way to determine if the tappet timing is different is to compare another sector gear vs the kingarms and see where the tappet lug pin is in comparison to the sector teeth. If it's different either a KA tappet might fix it, or just getting a SHS gearset will fix it. __________________ I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.