Airsoft Canada - View Single Post - Lonex 8mm Enhanced Bearing Gearbox V2 M4/M16 = Piston scoring cylinder

Crowin · April 28th, 2016, 01:24

Has anyone else had problems with Lonex gearboxes?
starting this build from scratch.
I was using Mad Bull PX Piston Full Teeth - ORANGE
with Modify Aluminum Bearing Piston Head
Modify S110 AEG Upgrade Spring and Modify Rotary Spring Guide V2
Running King arms normal torque gearset.

the teeth on the piston scratched the cylinder it went from 390FPS down to 200 fps. after a few shots
Swapped out cylinder and piston for an SHS Super Lightweight 14 Teeth Piston
it was shooting fine in semi with no significant fps loss until i switched it to full auto. and its now back down to 280FPS
Cant really see why its doing this. Just curious if anyone has had this happen.

April 28th, 2016, 01:24	#1
Crowin Trader rating Join Date: Sep 2009 Location: Kitchener-Waterloo-London	Lonex 8mm Enhanced Bearing Gearbox V2 M4/M16 = Piston scoring cylinder Has anyone else had problems with Lonex gearboxes? starting this build from scratch. I was using Mad Bull PX Piston Full Teeth - ORANGE with Modify Aluminum Bearing Piston Head Modify S110 AEG Upgrade Spring and Modify Rotary Spring Guide V2 Running King arms normal torque gearset. the teeth on the piston scratched the cylinder it went from 390FPS down to 200 fps. after a few shots Swapped out cylinder and piston for an SHS Super Lightweight 14 Teeth Piston it was shooting fine in semi with no significant fps loss until i switched it to full auto. and its now back down to 280FPS Cant really see why its doing this. Just curious if anyone has had this happen. __________________ lvl 3 sniper Certified