[8bitninja]

Originally Posted by pestobanana

I'm going to say that you should try it with your hop on all the way.

OR, double check your anti reversal latch. You could be consistently double feeding in semi, which is caused by anti reversal latch failure.

Well mate you've got it. It's double feeding in semi. Now you say it's likely an anti reversal latch failure (or bonehead reinstall), is there any video or other reference you have on proper install? I'm having a hard time finding a relevant v6 video that's also clear.

---
Things below here are my research so I can come back to it:

http://airsoftcanada.com/showpost.ph...41&postcount=5

Hey Alex,

Your culprit could be the hop up bucking. It may be allowing more than two bb's feed into it. Take the bucking out and check to see if it is torn and re-seat it back into the hop up unit.

There is also a neat little mod you can do to the hop by adding a little indent to act like a detent to keep the bb from pushing ahead by the magazine spring tension.

https://www.youtube.com/watch?v=49p7bJt4hOw