Quote:
Originally Posted by SuperHog
What were the diameters of the defective bb's?
Most magazines are so loose it shouldn't jam them. Also I run barrels with ID of 6.05 to 6.10. So unless these bb's are so big, no wonder they jammed and how could the company ship them knowing they are so far off? The other big question, do the molds not determine the final diameter of the bb's, plus or minus tolerance?
|
not sure, I didn't have any exemplars to measure against when I started digging deeper into my feeding issue. By the time I started measuring them, I had run out of good rounds. I personally felt the bad rounds were too small since the only size relation I could test was with another brand that did feed properly but stealth is saying they were large. He would've heard more from the manufacturer.
For a 450fps dmr, a .32 or a .36 is what I would choose. The bioshot .32s actually weigh closer to .31 if you have a scale that's precise enough to measure.
.