Airsoft Canada - View Single Post

Amoki · September 14th, 2015, 01:47

Element has cross-wired terminal 2 and terminal 3 on their TP120 connection. In order to fix the volume issue, you may have to swap terminals on your "real" TP120 PTT unless you can get to the male lead on the headset end (which is a PITA). By swapping the terminals, I have been able to run my Invisio M3 and my Sordin (modded to run on electret mic of course) on Element PTTs.

My advice? Open up *all* your Element PTT and re-solder the connection. That's how I've been rolling with my Invisio M3 for the last year or so. Throw away anything that uses a PCB board (you're left with their CHEST, U94, and U94 Gen 2 line) Then bring a spare PTT to the field to boot.

September 14th, 2015, 01:47	#13
Amoki Trader rating Join Date: Aug 2007 Location: Aotearoa	Element has cross-wired terminal 2 and terminal 3 on their TP120 connection. In order to fix the volume issue, you may have to swap terminals on your "real" TP120 PTT unless you can get to the male lead on the headset end (which is a PITA). By swapping the terminals, I have been able to run my Invisio M3 and my Sordin (modded to run on electret mic of course) on Element PTTs. My advice? Open up all your Element PTT and re-solder the connection. That's how I've been rolling with my Invisio M3 for the last year or so. Throw away anything that uses a PCB board (you're left with their CHEST, U94, and U94 Gen 2 line) Then bring a spare PTT to the field to boot. Last edited by Amoki; September 14th, 2015 at 01:50..