Airsoft Canada - View Single Post - Shimming new gears issue

lurkingknight · July 14th, 2015, 15:31

check to see if the grip is pinching the bushing/bearing on the bevel. 8 and 9mm gearboxes have more issues with grips but it's not uncommon to see a grip interfering with the bevel gear on any gearbox. You'll see a little pocket in the top of the grip that is supposed to accomodate the gear axle. you may have to dremel that wider/deeper.

Also g&p 120 motor... lol.

July 14th, 2015, 15:31	#8
lurkingknight "bb bukakke" KING! Trader rating Join Date: Jul 2011 Location: Ottawa	check to see if the grip is pinching the bushing/bearing on the bevel. 8 and 9mm gearboxes have more issues with grips but it's not uncommon to see a grip interfering with the bevel gear on any gearbox. You'll see a little pocket in the top of the grip that is supposed to accomodate the gear axle. you may have to dremel that wider/deeper. Also g&p 120 motor... lol. __________________ I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.