|
So I cut off the excess edges with a dremel sanded all the edges smooth, cut some notches to breath through the mouth and nose. I don't think fogging will be that much of an issue although aiming down your sights is a little bit more difficult but still easier than with wire mesh.
Just have to attach the strap on the back, add some padding on the inside and give it a nice paintjob. Shot a whole mag of bbs at it from about 5 feet away and it didn't leave a mark or affect the mask or cutouts.
My p90 is 370fps with .2 bbs and it would be able to probably take quite a beating, plus I think a shot to the center would distribute the force amongst both sides which wouldn't be nearly as bad as direct contact with that slot.
|