Airsoft Canada - View Single Post - A&K svd dragunov double feeding ULTIMATE SOLUTION!

Bozzytactiks · May 31st, 2015, 10:57

yep it shouldn't allow more than 1 bb at the time.

The magazine is pushing hard on bbs. The lips of the bucking are supposed to block the bb before it is chambered. I never understood why a bolt action like this doesn't have a magazine with lips just like the Gbbr version has.

I've upgraded my svd chamber since this post with the red one from Airsoftpro and the double feed was still going. It seems to me that to stop completely the double feed, it would need a completely different bucking setup or magazine. The bag wrap mod is really the best solution I've come across.

I think too that the whole barrel assembly tends to move upfront when you release the bolt. The Bbs are then pushed with a little forward angle and are chambered with a "stairs" patern increasing the double feed risk. I'll try this week to keep the airsoftpro chamber and put a washer or another oring to fix the barrel further back.

May 31st, 2015, 10:57	#3
Bozzytactiks Trader rating Join Date: Mar 2010 Location: Quebec, Qc	yep it shouldn't allow more than 1 bb at the time. The magazine is pushing hard on bbs. The lips of the bucking are supposed to block the bb before it is chambered. I never understood why a bolt action like this doesn't have a magazine with lips just like the Gbbr version has. I've upgraded my svd chamber since this post with the red one from Airsoftpro and the double feed was still going. It seems to me that to stop completely the double feed, it would need a completely different bucking setup or magazine. The bag wrap mod is really the best solution I've come across. I think too that the whole barrel assembly tends to move upfront when you release the bolt. The Bbs are then pushed with a little forward angle and are chambered with a "stairs" patern increasing the double feed risk. I'll try this week to keep the airsoftpro chamber and put a washer or another oring to fix the barrel further back.