Airsoft Canada - View Single Post - Review : Sequential Airsoft's Silent Fill Valve O-Rings (GBB's)

danhay · May 14th, 2015, 01:04

I grabbed these O-rings to add to my WE XDM magazines (there were no rings present). Initially I was concerned that the O-rings may fall out but they fit very snugly. After prodding them into place with tweezers I found the best way to seat them was using a gas fill adapter but being careful not to pinch the O-rings on the edge of the valve's conical inlet.

After installation, filling the mags was silent with no leakage. With a silent fill I was confident that I was completely filling the mags as I could actually hear when the gas stopped flowing (ie. pressure equalized)!

What can I say besides 4 thumbs up for these O-rings!

May 14th, 2015, 01:04	#21
danhay Trader rating Join Date: Jun 2011 Location: Calgary, AB	I grabbed these O-rings to add to my WE XDM magazines (there were no rings present). Initially I was concerned that the O-rings may fall out but they fit very snugly. After prodding them into place with tweezers I found the best way to seat them was using a gas fill adapter but being careful not to pinch the O-rings on the edge of the valve's conical inlet. After installation, filling the mags was silent with no leakage. With a silent fill I was confident that I was completely filling the mags as I could actually hear when the gas stopped flowing (ie. pressure equalized)! What can I say besides 4 thumbs up for these O-rings!