Airsoft Canada - View Single Post

EOD Steve · May 10th, 2015, 08:14

Did some work on the platform this weekend.

Modified stock trigger to add adjustability for pre-travel and break
Added wiring for a Gate MERF 3.2 MOSFET (CA wire is already 16awg low-resistance wire but I replaced one length with milspec 16awg wire)
Removed stock wiring tray in lower receiver for a cleaner MOSFET install
Installed Magpul MOE grip (motor angle isn't good but comfort is more important in this build as the gun weighs 10+ lbs)

May 10th, 2015, 08:14	#28
EOD Steve Trader rating Join Date: Jun 2012	Did some work on the platform this weekend. Modified stock trigger to add adjustability for pre-travel and break Added wiring for a Gate MERF 3.2 MOSFET (CA wire is already 16awg low-resistance wire but I replaced one length with milspec 16awg wire) Removed stock wiring tray in lower receiver for a cleaner MOSFET install Installed Magpul MOE grip (motor angle isn't good but comfort is more important in this build as the gun weighs 10+ lbs) Video: https://www.youtube.com/watch?v=sCANcc-6qPM __________________ The Steve has spoken. Last edited by EOD Steve; May 10th, 2015 at 08:16..