Quote:
Originally Posted by SuperCriollo
So, my Hi capa has this really, REALLY, annoying problem.
The grip safety seems to be pushing up the thumb safety, causing the pistol to go on safe really easily, and letting the hammer drop to a half cocked position if the trigger is pulled when the safety is on, and then switching it to the off position.
Ghaaa Help !
|
Does the safety get pushed into safe very easily with your thumb? Perhaps the notch that the safety detent rests in has worn down enough that it can be switched to safe with very little effort. You could take a round needle file and very gently make the grove that the safety detent rests in just a bit deeper.
Test and retest if you do this. Taking too much material off will make it so the safety is difficult to engage.