Airsoft Canada - View Single Post - BaoFeng (Pofung) UV-82

GR · January 26th, 2015, 13:38

Keypad programming of UV-5R/UV-82

I found a tutorial on a keypad programming of UV-5R. Tried it on the UV-82, and is basically the same thing.

The only problem with the UV-82 is that they removed the button to switch from VFO (Frequency) to Channel Mode, and vice versa. So now, instead of simply pushing a button, you would need to turn of the radio, and turn it back on while holding the MENU button, and then it will switch. A step back from UV-5R if you ask me. So if anyone wonders how, this is the answer (praise the power of youtube!).

Nothing too hard and steps make sense: set frequency, offset, then save to channel if you want to. It will take some time to memorize the process, however, not as complicated as I thought it would be.

January 26th, 2015, 13:38	#12
GR Trader rating Join Date: Jun 2014 Location: Somewhere in Ontario...	Keypad programming of UV-5R/UV-82 I found a tutorial on a keypad programming of UV-5R. Tried it on the UV-82, and is basically the same thing. The only problem with the UV-82 is that they removed the button to switch from VFO (Frequency) to Channel Mode, and vice versa. So now, instead of simply pushing a button, you would need to turn of the radio, and turn it back on while holding the MENU button, and then it will switch. A step back from UV-5R if you ask me. So if anyone wonders how, this is the answer (praise the power of youtube!). Nothing too hard and steps make sense: set frequency, offset, then save to channel if you want to. It will take some time to memorize the process, however, not as complicated as I thought it would be. Last edited by GR; January 26th, 2015 at 13:52..