Airsoft Canada - View Single Post - ICS G33 with downgraded spring firing twice on semi

WinnipegDragon · January 22nd, 2015, 01:28

So I think I have the same issue as this: http://airsoftcanada.com/showthread....uble+fire+semi

I cracked open my mechbox and pulled the M120 spring and replaced it with an SHS M90 so I can run this in an indoor field with a 350fps limit. I also popped in a 7.4v LiPo which is brand new and fully charged.

In Semi, it fires at least twice and after releasing the trigger I can still hear the motor/gears winding down a bit. Every five or ten pulls, the trigger will lock up like the safety is on. Full auto runs fine.

Is this just the over-cycling issue or does the trigger locking indicate another issue? I may have been a bit overzealous cracking open my mechbox on a brand new gun with no experience...

January 22nd, 2015, 01:28	#1
WinnipegDragon Trader rating Join Date: Feb 2006 Location: Winnipeg	ICS G33 with downgraded spring firing twice on semi So I think I have the same issue as this: http://airsoftcanada.com/showthread....uble+fire+semi I cracked open my mechbox and pulled the M120 spring and replaced it with an SHS M90 so I can run this in an indoor field with a 350fps limit. I also popped in a 7.4v LiPo which is brand new and fully charged. In Semi, it fires at least twice and after releasing the trigger I can still hear the motor/gears winding down a bit. Every five or ten pulls, the trigger will lock up like the safety is on. Full auto runs fine. Is this just the over-cycling issue or does the trigger locking indicate another issue? I may have been a bit overzealous cracking open my mechbox on a brand new gun with no experience...