Quote:
Originally Posted by MADDOG
Another Tidbit to remember on this issue is to make sure the nozzle, where it fits to the tappet plate, is tight and does not wobble or fall out easily. The more play you have in that fitment the more chance you have of the nozzle being pushed out of position.
Tighter is always better  |
I've found that tappet plate fitment has little to no effect on nozzle wobble due to the natural flex in the tappet. The tappet also needs to be loose fitting in the gearbox itself otherwise it will get stuck, so it will wobble with the nozzle.
It does however affect FPS consistency as back and forth play will affect where the BB seats in the chamber.