|
I don't think an M90 would shoot above 350 RainyEyes. The stock spring is either an M110 or M120 and that shot pretty consistently at 380, and everybody I've talked to said that the M90 should drop it below 350.
Guess the spring was a $12.00, 2-hour lesson. Good to know, and now I know better. This means I can just go out, get a new spring, and drop it into the current piston behind the metal piston head? (ie, keep everything the same, except don't bend the spring to attach to piston head, just drop it in)
The hopup chamber already had a hairline fracture in it when I first disassembled it. It was through no fault of mine. If I ABS-cemented it back together, it should be strong enough and airtight. I did an airseal test on it, and it seems like it isn't leaking.
The Battleaxe M4-G36 magwell adapter works fine with the JG G36C if you cut off the nozzle on the adapter. Of course, this means if you have a G36 with the standard hopup, you won't be able to use that magwell adapter anymore and have to get a new one.
Steep learning curve, but better to learn early on a cheapo gun then the eventual VFC right?
|