Airsoft Canada - View Single Post - Bevel gear getting pressed against pinion too hard with no shims?

ThunderCactus · November 15th, 2014, 22:36

I've had the bevel that low before, but usually in mechboxes that were really wide and needed like 1.3mm of shims

November 15th, 2014, 22:36	#8
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	I've had the bevel that low before, but usually in mechboxes that were really wide and needed like 1.3mm of shims