[DropTheBomb]

I know this is the bevel for sure since I have put only the bevel in and it is the bevel causing the difference in noise. I know for a fact that it is simply the bevel being pushed on by the pinion. Problem Is of all the gearboxes Ive ever shimmed Ive never come across a gearbox where I didnt have to raise the bevel gear towards the pinion some how, let alone for the pinion to put this much pressure on the bevel from the get go.

To give some idea I put a 0.1mm shim underneath the KWA bevel to raise it towards the pinion and that changed the bevel from running near perfect to grinding.

Now my question is, is it normal for the bevel to be this low sometimes? The gun still functions fine, but im worried about the effect this may have on the gearbox.

As stated because I shim from the bevel it makes the other gears kinda "raised up" so to speak. Im worried this might affect the performance of the Sector on the cut off lever and the Anti-reversal latch on the bevel since they are not perfectly lined up.