Airsoft Canada - View Single Post

ThunderCactus · October 25th, 2014, 00:08

Get a smaller lipo?
We use 11.1v 25c 1200mah sticks in the PTWs, and you can fit 3 of them in a crane stock with a short mosfet.

If you really do want to bore out the buffer tube, I doubt you'll be able to take out enough material to make a difference. Your problem you describe is of length, not diameter, which you can't make them any longer.
But if you did want to bore it out, what you're looking for is a lathe and a long carbide boring bar.

October 25th, 2014, 00:08	#8
ThunderCactus Not Eye Safe, Pretty Boy Maximus on the field take his picture! Trader rating Join Date: Feb 2007	Get a smaller lipo? We use 11.1v 25c 1200mah sticks in the PTWs, and you can fit 3 of them in a crane stock with a short mosfet. If you really do want to bore out the buffer tube, I doubt you'll be able to take out enough material to make a difference. Your problem you describe is of length, not diameter, which you can't make them any longer. But if you did want to bore it out, what you're looking for is a lathe and a long carbide boring bar.