Airsoft Canada - View Single Post - Looking for a Bullpup (Not the canine ones)

Red Dot · August 8th, 2014, 03:13

I'd hold off on optics until you got a feel for the gun, I've recycled money through a couple now and I'm still not 100% convinced on my setup so my advice is run iron sights for a bit.

For charger I recommend the IMAX B6AC, will charge anything you need. I don't recommend an 11.1v lipo right out of the box on a lower-end gun as you'll put too much stress on the internals, 11.1v is good on higher-end setups that can take the additional abuse. 7.4v lipo should be fine.

As for the gun specifics can't give advice there...

August 8th, 2014, 03:13	#25
Red Dot Google level: BOSS Trader rating Join Date: Dec 2013 Location: Stouffville, Ontario	I'd hold off on optics until you got a feel for the gun, I've recycled money through a couple now and I'm still not 100% convinced on my setup so my advice is run iron sights for a bit. For charger I recommend the IMAX B6AC, will charge anything you need. I don't recommend an 11.1v lipo right out of the box on a lower-end gun as you'll put too much stress on the internals, 11.1v is good on higher-end setups that can take the additional abuse. 7.4v lipo should be fine. As for the gun specifics can't give advice there...