Airsoft Canada - View Single Post - WETTI M4 Upgrade to OpenBolt or replace broken Floating Valve ?

elmathy · July 27th, 2014, 00:02

Hi,

today my WETTI M4 have broke ... all the gas where released in one big smelly cloud and the gun did not fire ( tested with more that one mag ).

As a read it may be the Floating Valve that just broke, seem to be that, causse when I pull the bolt back, the floatting valve stay at is place and don't go back.

Here is a picture with the bolt pull back ( floatting valve stuck at is place ) !

But the other problem is that the bolt don't want to go at is place correctly and I can't separate the lower receiver from the uppper of my M4.

I have remove the stock and the bolt don't go at his place ...

Anybody have a solution for this ?

Gun Doc avaiable near Trois-Rivières, Québec ?

July 27th, 2014, 00:02	#1
elmathy Trader rating Join Date: Jan 2011 Location: Bécancour, Qc	WETTI M4 Upgrade to OpenBolt or replace broken Floating Valve ? Hi, today my WETTI M4 have broke ... all the gas where released in one big smelly cloud and the gun did not fire ( tested with more that one mag ). As a read it may be the Floating Valve that just broke, seem to be that, causse when I pull the bolt back, the floatting valve stay at is place and don't go back. Here is a picture with the bolt pull back ( floatting valve stuck at is place ) ! But the other problem is that the bolt don't want to go at is place correctly and I can't separate the lower receiver from the uppper of my M4. I have remove the stock and the bolt don't go at his place ... Anybody have a solution for this ? Gun Doc avaiable near Trois-Rivières, Québec ? __________________ Last edited by elmathy; July 27th, 2014 at 10:32..