Airsoft Canada - View Single Post - Homemade Low-Cost Extended Glock Magazine Release

ccyg8774 · July 13th, 2014, 01:54

Got the idea from:
http://glock.pro/glock-pistols/2714-...eview-g19.html

Tools used: a pair of pilers, lighter, metal wire, sand paper, screw driver, a pocket knife.
(I do have better tools, but I was too lazy to go to the garage and get them. And they are too noisy for this time of the night.)

Materials: a stock magazine release, a small screw, a piece of black plastic that were cut from the case of a broken wall charger.

This is mostly made for experimenting... But it actually worked.

Now let the laughing begin.

July 13th, 2014, 01:54	#1
ccyg8774 Trader rating Join Date: Jun 2012 Location: Brampton, ON	Homemade Low-Cost Extended Glock Magazine Release Got the idea from: http://glock.pro/glock-pistols/2714-...eview-g19.html Tools used: a pair of pilers, lighter, metal wire, sand paper, screw driver, a pocket knife. (I do have better tools, but I was too lazy to go to the garage and get them. And they are too noisy for this time of the night.) Materials: a stock magazine release, a small screw, a piece of black plastic that were cut from the case of a broken wall charger. This is mostly made for experimenting... But it actually worked. Now let the laughing begin. __________________ Last edited by ccyg8774; July 13th, 2014 at 02:09..