[Trev140_0]

So here is a good one. I figured the problem out already but we so bizarre I decided to post this.


See who can guess the problem.

Gun. Stock m4 VFC quake.

Only thing changed is the stock piston. Swapped with a 4 tooth metal. Same tooth count as stock.

Here it the problem. Shoots fine then gets "stuck" every once in a while. Always stuck at the furthest point back. Piston all the way to the end. Basically like where a mosfet should ensure the piston doesn't stop.

So then it's basically jammed. Can't cycle it. Got to crack it open and Re set it.

So here are the things that you need to know.
Battery and motor are fine. So is wiring. And trigger contacts.

Figured would cut that out so you try and get to the problem .

Again was ridiculous but something that should be passed on....

Go.