Quote:
Originally Posted by Spike
Make sure you get a good quality inner barrel. Your hop up bucking that came with the gun is actually awesome in terms of regular buckings, so you can continue to use that for now.
Grab yourself a prometheus, PDI or ORGA 6.13 barrel and install it (you don't NEED to get a longer one, but you can), do the teflon tape mod to your hop up unit when you install.
For full internal upgrades I would recommend:
Sorbothane pad
Type 0 cylinder (if it doesn't have one already)
New wiring + basic mosfet
Torque up motor
3S lipo
M120 spring
|
The type 0 cylinder would be needed only if he gets inner barrels longer than 455 mm or the widebore one. A longer barrel than that isnt adding that much acuracy.
I would add a maybe to the list wich is a piston head if the airseal is not optimal between the piston and the cylinder. However I would test it before buying one .