Airsoft Canada - View Single Post - Taurus PT92

Jamblor · June 22nd, 2014, 09:22

So I bought a brand new KJW mag tried it, and the gun cycled properly.
I took apart all my old mags and really oiled up the o-rings and valves to prevent any leaks.
I also noticed that the mag catch on the lower frame was a bit worn, same with the groove on my older mags. Switched around the mag catch so its a left handed release.
Seems to hold the mags tighter in the gun.
So it was likely multiple problems.

Hope this helps some people.

June 22nd, 2014, 09:22	#6
Jamblor Trader rating Join Date: Mar 2014 Location: Cambridge, ON	So I bought a brand new KJW mag tried it, and the gun cycled properly. I took apart all my old mags and really oiled up the o-rings and valves to prevent any leaks. I also noticed that the mag catch on the lower frame was a bit worn, same with the groove on my older mags. Switched around the mag catch so its a left handed release. Seems to hold the mags tighter in the gun. So it was likely multiple problems. Hope this helps some people.