[Dynamo]

the double shooting started after swapping out the 430 fps spring in it for a 350 cqb spring.
that's right, 430 fps spring. though it was shooting about 370.. so massive airleak that I had to fix. modified a ptw hopup/barrel and made a new outer barrel for it, and got a huge fps boost.
had the gun wired to a raptor fet (had to be creative to get it to with with the lame two stage trigger), but the fet ended up breaking..
with the fet, there was no double shots, but the motor would heat up quite fast due to the active breaking working overtime to prevent over spin.

since my style of play is mainly cqb where full auto is prohibited( I prefer semi auto anyways), the two stage trigger is more of a pain, especially with the over cycling. I let the support gunners in my squad take care of full auto fire.

since it currently can't reliably shoot in semi, I decided to gut it and attempt to make it into a gas gun.

oh, and Ares, you cheap bastards, why was the detent for the ejection paddle not put in? can someone check their pdr's paddle for the detent? the frame for the paddle has two slots that line up with a hole just behind the screw that fastens the paddle to the button. I put a steel bearing, spring and a set screw into that hole. now the paddle clicks into position.