Airsoft Canada - View Single Post

Zack The Ripper · February 12th, 2014, 20:53

After some review of current ASAp plates I have installed on my AEG and GBB ARs I likely wouldn't be able to use an ASAP with the Angry Gun adapter without some serious modification.

There are "tab" on either side that act as seating lips around the edges of the AR receiver. Feel silly for missing that..

Would have to grind quite a bit off and that might ruin the stability of the plate..

I'm wondering; I know the ones on the side are supposed to be, but is that a QD sling swivel hole directly underneath the buffer tube?

February 12th, 2014, 20:53	#10
Zack The Ripper Trader rating Join Date: Jul 2012 Location: CFB Shilo, MB	After some review of current ASAp plates I have installed on my AEG and GBB ARs I likely wouldn't be able to use an ASAP with the Angry Gun adapter without some serious modification. There are "tab" on either side that act as seating lips around the edges of the AR receiver. Feel silly for missing that.. Would have to grind quite a bit off and that might ruin the stability of the plate.. I'm wondering; I know the ones on the side are supposed to be, but is that a QD sling swivel hole directly underneath the buffer tube? __________________ Guardians of Asgaard Last edited by Zack The Ripper; February 12th, 2014 at 21:02..