Quote:
Originally Posted by Jagdalex
Since you have a G18 too, well dont install the guarder 150% spring until you get an alu slide...you will break your stock slide in no time. Just install the hammer spring
|
Quote:
Originally Posted by Jagdalex
Get yourself a steel full auto seer
The steel mag catch is good if you are using extended mags regularly
The valve rocket is 21$ + 7$ shipping from Tokyo model, for gas efficiency and higher fps I think it is a must.
For tightbore, I am using the TK twist barrel and the accuracy is really good. Looks more for accuracy and consistency over power for your guns
If you to upgrade the piston head. Mind as well get the nozzle of the same brand. I went guarder for both.
If you plan on keeping the stock slide for a long time, the best recoil spring is the nineball with buffer. It works perfectly with my stock slide...
|
A 150% recoil spring will actually dampen the slide impact on the charging stroke.
This is because a Plastic slide doesn't have enough weight for it to fully cycle the action to the fullest fullest extent of the slide travel. Thus less felt-recoil is the result.
On the return stroke, it will have a bit of a higher velocity but since the slide doesn't have a full travel, the return distance will be shorter. Thus the slide will not be at maximum velocity on the return stroke....