Airsoft Canada - View Single Post - King Arms M4A1 Velocity Drop/Feeding Problems

Stealth · December 30th, 2013, 23:17

LOL first off get a new gundoc. Why would he/she release a gun without verifying that it works as expected?

Onto your issues:
1) Nozzle is probably too long; tappet plate is off-spec; the hop-up unit is not pressed against the mechbox; bad mags; or a combination of the above.
2) Flash-hider could be obstructing the path of BBs; inner barrel length is shorter than outer barre length; bad ammo; very dirty barrel; or some combination of the above
3) air seal issues (see #1)

December 30th, 2013, 23:17	#2
Stealth Mr. Silencer Trader rating Join Date: Dec 2001 Location: Toronto	LOL first off get a new gundoc. Why would he/she release a gun without verifying that it works as expected? Onto your issues: 1) Nozzle is probably too long; tappet plate is off-spec; the hop-up unit is not pressed against the mechbox; bad mags; or a combination of the above. 2) Flash-hider could be obstructing the path of BBs; inner barrel length is shorter than outer barre length; bad ammo; very dirty barrel; or some combination of the above 3) air seal issues (see #1) Last edited by Stealth; December 30th, 2013 at 23:58..