Airsoft Canada - View Single Post - i need Help to find a good ir laser/light

Diablo06 · May 6th, 2020, 07:22

All the repro lasers (ie airsoft ones) tend to be way too powerful...

a) unsafe

b) they will white out your tubes if you're using them in CQB.. they'll mean you cant run recording units well as they'll see the brightest bit (the laser) and set their gain to that for recording

c) because they're basically lightsabers, NOD users will spot you from miles off...

You can either mod them to be lower powered... or buy real lasers (expensive).

I've just got a Zenitco (ivan tac referenced above) and will compare with real peq2a and G&P DBAL so once I've done some testing I'll post back, but a friend has one of the Zentico's and its beam is super tight and just a dot, much like the real Peq's and NOT like the repro's that are half illuminator, half laser, full lightsaber.

May 6th, 2020, 07:22	#8
Diablo06 Trader rating Join Date: Jan 2018	All the repro lasers (ie airsoft ones) tend to be way too powerful... a) unsafe b) they will white out your tubes if you're using them in CQB.. they'll mean you cant run recording units well as they'll see the brightest bit (the laser) and set their gain to that for recording c) because they're basically lightsabers, NOD users will spot you from miles off... You can either mod them to be lower powered... or buy real lasers (expensive). I've just got a Zenitco (ivan tac referenced above) and will compare with real peq2a and G&P DBAL so once I've done some testing I'll post back, but a friend has one of the Zentico's and its beam is super tight and just a dot, much like the real Peq's and NOT like the repro's that are half illuminator, half laser, full lightsaber.