[MADDOG]

Bought it as a project gun:

-Way too much oil on the piston, spreading into the barrel assembley after firing, definitely requires a take down and re lube with grease. Too much grease on the gears
-Internals, really good. Integrated sector delay, good quality second tooth removed piston ( softer TM type) with adequate angle of engagement, ported cylinder head with good seal and bearing guides on the piston head and spring guide. Bearing gear assembley that was well shimmed and solidly in place with nice ratio, not too slow. Tappet plate was strong and wiring was good quality. Hop up is clear but the bucking is good, hop up nub needs to be replaced for consistency.

The only items I changed were the feed nozzle ( no o ring clear plastic), hop up nub, motor (Infinite torque up I had lying around) and the spring.

All plastic/Poly externals that are very light but offer the correct look and feel.

This AK will be a beast on the field, outdoor test coming soon.

To Be continued