Airsoft Canada - View Single Post

Alanh · July 11th, 2013, 11:39

hmm having feeding issues similar to this and other threads ive searched... seems that i have to open the mech box and take a look ...

EDIT: in the process checked hopup rubber, bit permanent indent and small cracking where it the hopup nub fits into the rubber of the TM AK, changed with new G&P part, seems to feed fine now in semi, before almost every second shot was two bbs. In auto though ever 10 or so shots there is a blank fire, I am suspecting the tappet plate delay is not enough in the setup. For now its fine.

July 11th, 2013, 11:39	#49
Alanh Trader rating Join Date: Dec 2010 Location: St. John's NL	hmm having feeding issues similar to this and other threads ive searched... seems that i have to open the mech box and take a look ... EDIT: in the process checked hopup rubber, bit permanent indent and small cracking where it the hopup nub fits into the rubber of the TM AK, changed with new G&P part, seems to feed fine now in semi, before almost every second shot was two bbs. In auto though ever 10 or so shots there is a blank fire, I am suspecting the tappet plate delay is not enough in the setup. For now its fine. Last edited by Alanh; July 11th, 2013 at 14:31..