Hey guys so I'm looking at upgrading my first AEG and after much reading I'm looking at going for an accurate medium(130ish feet) range AEG so far here is a list of parts I've come up with
- Lonex Aluminum Cylinder Head for Ver. 2
-Lonex Enhanced Hop-up Unit for M4/M16
-Lonex Extreme Toughness Piston (10-Teeth - Burgundy)
-Lonex POM Ventilated Piston Head
-Prometheus Flat Hop-up Tensioner
-Lonex M4/M16 Air Seal Nozzle
-Lonex Improved Hop-Up Bucking & Sleeve (50D)
- Mad Bull 6.01mm Ultimate Tightbore Barrel - 509mm
- Spartan Force Recon LW 110mm Slim Silencer
Now my tar is the S&T one with a metal gearbox I already have a m120 spring to go with all those upgrades and I have a few questions
1.for the barrel I would rather stick with my current size (413mm) but the only options I can find are 363 and 509 being as it is can I cut down the barrel to the length I want and finely San the inside edge as to not alter the accuracy?
2. What would be the most appropriate hopup bucking for this setup? I've seen so many people say diff things so I just chose one I saw was decsnt
Now keep in mind all these parts are from two stores in Canada (airsoftstore.ca and airsoftparts.ca) and I would rather keep my order generally with two to three Canadian stores.
Also I'm not looking for a super accurate dmr ATM I'm just looking for a decent AEG that can keep a tight grouping at a distance and reliable, with that in mind my parts list I would rather keep below $200 (these total 180ish) before shipping.
The 6.01 tightbore I have chosen as a few guys I know have that size on their AEGs and they are perfectly with propper maintenance.
Thanks for your time guys
