Airsoft Canada - View Single Post

N_Force · May 29th, 2013, 16:34

Don't worry about the springs, and you may try to use a pin or small screwdriver lightly to push both inside see if you are able to push the len in, also when you release it, the len should be spring back. That's the way to check if the len is movable and able to be adjusted. If it is not moving , that could be stuck or something. If it does move, it's nothing wrong.
What would you find?

May 29th, 2013, 16:34	#10
N_Force Trader rating Join Date: Oct 2006 Location: Toronto, Ontario	Don't worry about the springs, and you may try to use a pin or small screwdriver lightly to push both inside see if you are able to push the len in, also when you release it, the len should be spring back. That's the way to check if the len is movable and able to be adjusted. If it is not moving , that could be stuck or something. If it does move, it's nothing wrong. What would you find? __________________ aka Uncle Last edited by N_Force; May 29th, 2013 at 17:06..