Airsoft Canada - View Single Post

Qlong · April 18th, 2013, 11:45

Any Ø 3.0mm steel stock works. Cut it to 21mm and deburr, you will have your self a nice pin.

The shank of 3 inch deck screws work as well.

If it's made in Japan, it is most likely it's going to be metric. Don't use a roll pin you find at Homeless Depot or Crapnadian Tire as they will most likely be imperial. You wont be getting those things out of your frame ...or in.

April 18th, 2013, 11:45	#13
Qlong Division Trader rating Join Date: Jun 2007 Location: Scarborough, Ontario	Any Ø 3.0mm steel stock works. Cut it to 21mm and deburr, you will have your self a nice pin. The shank of 3 inch deck screws work as well. If it's made in Japan, it is most likely it's going to be metric. Don't use a roll pin you find at Homeless Depot or Crapnadian Tire as they will most likely be imperial. You wont be getting those things out of your frame ...or in. __________________ Weee! Last edited by Qlong; April 18th, 2013 at 11:52..