|
I'm going to add my 2 cents here. For those who done this and find that their mags still leak.
First:
Preparation
Preparation is the key when doing a job like this.
Degreasing every parts that are going to be in contact with the gasket maker thoroughly will do wonders and insure a tight none leaky seal.
Second:
Less is more
Too much gasket maker will reduce the mags capacity in gas as this surplus will take up valuable real estate in the reservoir.
Third:
DO NOT overtighten the valves
If the valves are tight and it's still leaking, do not overtighten them, you'll make thing worse by crushing or even cutting the o-ring. I use o-ring grease that is found in pool supplies shop. They are rubber safe and work Wonders on leaky orings.
Hope this helps
__________________
Vérificateur d'age Mauricie
Quote:
Originally Posted by Strelok
So you're saying we cannot engage in a hobby once we are older?
Children these days.
|
|