[MultipleParadox]

Hey guys,
first thing first -> How come this thread is not stickied yet? O.o
there's a great wealth of info in there, thanks e-Luder, and all who've contributed to this thread!

That said, I'm in the process of buying a used TM G18c, with the following installed, and wanted some recommendations:

-shooter's design slide
-guarder reinforced polymer grip (tan)
-guarder spring guide/spring
-shooter's design hammer spring
-TK twist barrel
-9ball purple bucking

===

I think the actual upgrades are already fine as it is, but wanted to make sure that there's no "dangerous combination" that might lead to premature wear. Or if you have any recommendations about what to add/change to have better durability, etc.

I also read somewhere (don't remember who/where, sorry) about the G18c having a spring/detent pin somewhere around the BBU that could eat the nozzle away if it wasn't modded, but there was no mention of what that mod is, and looking and the exploded diagrams I couldn't really see where that pin is supposed to be. Anyone can clarify?

Regarding mags, I would be tempted to get the WE's mags as they are much less expensive, but am on the fence considering it's WE... Some other forums seemed to say WE's have higher flow and making it easier to move heavier slides and increases performance because of this. True? And are the mags worth it or will they leak their life after a game or two?

Thanks for your inputs!