Quote:
Originally Posted by kar120c
thanks, but the Marui G17 hammer mechanism is the same as the KJW G27?
|
From some brief reading, it appears that the KJW 23 is a mix of TM G17 and G26 parts.
Thread:
http://www.jocairsoft.com/forums/top...g2332c-tm-g17/
In this thread Ken does say that all TM's glocks have the same internal designs.
This makes sense to me, why would any company make a new set of expensive molds when the only difference is the size of the slide/ frame, barrel, inner barrel?
With this same kind of thinking, why would a company that is cloning someone else's product try to change mechanisms, and increase the cost of producing the copy, and risk messing it up? The whole point of producing a copy is to quickly turn a profit, without using too much of your own resources.
You could also look at posts 99-105 or so in this thread:
http://www.airsoftcanada.com/showthread.php?p=1710222
There are some exploded views of the TM 17, 26, and the KJW 23. To me, they all look the same.
A review of the KJW G23:
http://www.airsoftcanada.com/showthread.php?t=14144
Within the first 10 lines it says that a KJW G23 is based off a KJW G27, which was cloned off a TM G26, which according to the above links has the same internal designs as a TM G17.
Perhaps the easiest way to find out if they are the same or not is to just try taking apart your pistol following the videos, and if a step doesn't line up, then you know if it is different or not, and can still reassemble it if you don't feel comfortable proceeding.
EDIT: Just realized that you were asking about the KJW G27, not the G23...
Still, looking at the diagram from this link:
http://www.greekairsoft.gr/manuals/m...G27+Manual.pdf it appears to have the same hammer mechanism.