|
Heres another update:
I fixed the wobble in the stock now.
I used some plastic from some AEG gear packaging. About 1mm thick or so.
I placed a square on the stock side at the top to eliminate the up and down wobble.
Then cut a key hole shape to fit into the area where the stock locks into place.
Glued them down with Q Bond so its not going any where.
The stock is now SOLID. No movement at all in any direction. The only wobble is when the stock is folded. Which is only for transport so dont care to much about that.
This fix took me about 8mins or so.
|