Airsoft Canada - View Single Post

Arktic · January 17th, 2013, 08:46

Just did some testing with the mag.

Basically as long as their is enough bbs in the tube leading to the hop up you will be fine.
I loaded the mag full. Put it in the rifle so the tube was filled like it should. Then pulled the mag out and empted the bbs from the mag. Then put the mag back in and fired out all the bbs that were in the tube.

I estimate that the tube holds between 20 and 30 bbs or so.

With regards to the barrel. It has a 455mm barrel from what I guestimate. (Holding another 455mm barrel in roughly the same position) I have yet to open the rifle up as I dont know how to disassemble it yet. Going to tackle that in the next few days. I was hoping to use my Angry Gun Steel tight bore from my WE M16A4 but the 509mm barrel will be way to long. Unless I add a suppressor to it.

January 17th, 2013, 08:46	#31
Arktic Trader rating Join Date: Jan 2013 Location: Cape Town, South Africa	Just did some testing with the mag. Basically as long as their is enough bbs in the tube leading to the hop up you will be fine. I loaded the mag full. Put it in the rifle so the tube was filled like it should. Then pulled the mag out and empted the bbs from the mag. Then put the mag back in and fired out all the bbs that were in the tube. I estimate that the tube holds between 20 and 30 bbs or so. With regards to the barrel. It has a 455mm barrel from what I guestimate. (Holding another 455mm barrel in roughly the same position) I have yet to open the rifle up as I dont know how to disassemble it yet. Going to tackle that in the next few days. I was hoping to use my Angry Gun Steel tight bore from my WE M16A4 but the 509mm barrel will be way to long. Unless I add a suppressor to it. Last edited by Arktic; January 17th, 2013 at 08:49..