Quote:
Originally Posted by jordan7831
I have an interesting problem if anyone can chime in.
I have a KJW MEU and the problem I am getting is that in order to get the gun working, Ineed to insert the mag with the slide locked back.
If I insert my mag with the slide forward the gun does not fire. However simply locking the slide back and reinserting solves this issue.
I have a spare set of TM MEU parts (hammer, sear, knocker) and swapped them to try to find the culpret and no luck. Best I can think is something is wrong with the knocker or knocker spring.
Thank you,
Jordan
|
The few times I've seen this, it was an issue with the valve knocker being too long, not having a relief edge on it, or the actual seating in the frame is too far forward.
Grinding a relief angle at the bottom of the strike face usually resolves the issue. I would try this solution first.