Quote:
Originally Posted by dmr
hey i got my kjw 10/22 today and there is a few things off, the bb at about 125-150 feet curves to the right, and im using 0.28's. im also using green gas, which brings me to number 2, some lube is coming out of the barrel when i shoot. only once in a while though. also the hop up wont ajust the tragectery of the bb. could anyone plz help
|
on my 10/22 using Propane I consistently get 250+ feet with it easy.
Tip 1 - get the 380mm inner from RaTech
Tip 2 - Get the RaTech hop up rubber
Tip 3 - Use .36 bb's
when i got mine (version 2) I pulled out the stock inner and put in the RATech 6.01 TB 380mm
I wanted to use the barrel stabilizer (part from the stock barrel so I had to boar it out. put it on the new RAt Inner and put it in the outer barrel.. absolutely Zero wobble..
now the tip. removed the orange paint BUT the plastic inner tip was eaten up by the chemical. so now the inner was loose at the end..
solved that by inserting a barrel extension (Reverse) into the outer barrel. had to lathe it down a bit so it would fit in super tight...
so now my 10/22 has a 14mm ccw thread on it as well...
the huge key to this gun's accuracy and distance I believe is the use of .36 WE BB's
I am going to try .43's as well
I use