Quote:
Originally Posted by suzenonest
I checked again, the arl is in good shape and installed correctly. It's not too tight, just added a shim to get rid of any play
On second thought, maybe my cut off lever or nub on the sector gear may be slightly worn down, and replacing either or both would fix the issue
|
Its either the cut-off lever (cracked or broken), or you shimmed the sector gear too high. It could be your trigger system.... but i highly doubt it. Inspect the cut-off lever for and slight cracks or breaks. If its not broken double check check and make sure the sector gear isnt too high.
If this problem persists get a sector chip. You can get them for cents. Alot cheaper than a motor or MOSPHET....